Keygen-Co

Download key generator for Siemens Simatic Step 7.5

About Siemens AG
Siemens AG is a German engineering conglomerate, the largest of its
kind in Europe. Siemens has international headquarters located in
Berlin, Munich and Erlangen. The company has three main business
sectors: Industry, Energy, and Healthcare; with a total of 15
divisions.
Worldwide, Siemens and its subsidiaries employ approximately 420,800
people in nearly 190 countries and reported global revenue of 76.651
billion euros for the year of 2009. Siemens AG is listed on the
Frankfurt Stock Exchange, and has been listed on the New York Stock
Exchange since March 12, 2001.
About Siemens Simatic Step
SIMATIC is the name of an automation system which was developed by
the German company Siemens. The automation system controls machines
used for industrial production. This system makes it possible for
machines to run automatically. Depending on the needed function of the
machine you have to upload the right program on your Simatic unit.
This unit is kept in a control cabinet near the machine.
Function
Simatic is similar to a digital computer which can store and run
programs. The Simatic also has some inputs and outputs. The running
program on the Simatic controls these inputs and outputs. Both are
connected by electrical wires with the machine. That makes a
communication between the Simatic and any machine possible. As the
case may be the inputs and outputs are set on a �High� signal or
on a �Low� signal by the program. These are different electrical
definitions. Finally these signals are important if an action in the
machine happens or not.
About Simatic S7-PLCSIM
Simulation systems provide effective support with the development of
programs and the following actual application. In the automation
environment, a simulated test environment including PLC and process
reduces startup times and thus costs, for example. Early discovery of
programming errors and optimization of program sections enable the
optimized and errorfree use of the programs in the actual system. If a
program is modified, it can be tested prior to loading it onto the
plant control system.