Download key generator for Multiboot 2k10 DVD USB HDD 4.1 Unofficial build
Creation / deployment system images, restore / copy data, resuscitation of the operating system and recovery boot, clearing the OS from viruses / trojans and blockers / pornobannerov, testing the basic components of MS, and more. There is a support network vozmozhnost to the Internet and multimedia support (in all builds, except for SV-Micro). There Notch use most of the program of the assembly as a "portable" (fully portable, they are not, it's just self-extracting into a marketing-TEMP directory with autoenrollment), and convenient way to connect a software package assembly for use in a conventional operating system or other PE builds.
Multiboot 2k10 DVD / USB / HDD (author assembly for DVD).
SV-MicroPE 2k10 Plus Pack CD / USB (separate assembly without the author's repair network and multimedia for CD).
SV-MicroPE 2k10 Plus Pack CD / USB (separate repair informal assembly without the network and multimedia for CD).
How to create a bootable CD or DVD USB-Flash/USB-HDD
1. For CD / DVD:
You will need a program for recording images - for example, Nero Burning ROM. Run the program, Recorder -> Burn Image, specify a file with a way to make sure that was marked "Finalize Disc" and the method of recording "Disc-At-Once (DAO)". Disc with other recording settings will not boot! Nero also recommended to "Enable generation of short Lead-Out" (File -> Options -> Expert Features), this reduces the recording time, speed up the recognition time compact and slightly increase the "capacity" blanks. Write speed - the minimum within reasonable limits. I recommend 8-16x for CD-ROM drive or 4 - for the DVD. Principle is slower write -> faster (reliable) read out.
You can also use other programs that can record images (for example, UltraISO, Alcohol 120, ...).
2. Setting build on the stick: pic
Attention! Many utilities (for example, the standard windows format) are not fully formatted USB flash drive, they see that it is, and do not touch the areas that they appear to be correct. Therefore, it is advisable to clean the USB flash drive, for example by using RMPrepUSB, HDD Low Level Format Tool or run a test on record any of the utilities FlashNull, Check Flash, HD Tune Pro, Flash Memory Toolkit Pro, it's guaranteed to kill the layout and formatting will cause the program to make everything from scratch . After cleaning necessarily "distort" the stick, but after formatting it to perform validation using CheckDisk (2k10 \ Programs-2k10 \ HDD-Utilites \). When bugs repeated cleaning stick and formatting. If you use formatting with BootICE -> Parts Manage -> ReFormat USB disk, then it is an extra operation. BootICE formatting automatically does the cleaning.
2.1 USB flash drive, you must first format (Note: All data on the flash drive will be erased). It is necessary to flash drive was seen as Bios USB-HDD, with which you can boot the operating system. If the flash drive / propeller has been used as a boot, this step can be skipped. The USB flash drive is recommended to format a FAT32 (in this file system, it lasts longer and more stable), but, if necessary, you can use NTFS (faster "kills" the stick, requires a "safe removal", but it supports files larger than 4GB). This is best done using RMPrepUSB (is in the assembly on the way 2k10 \ Programs-2k10 \ Flash-Utilites \ RMPrepUSB \ or from the menu P2Start.exe "Programs 2k10 \ USB-Flash utility"). This utility creates as close as possible to the screw geometry on a flash drive. If you check Boot as HDD (C: 2PTNS), the flash drive will be created two partitions (half the minimum for maximum simulation screws). But I do not recommend using this option, this flash drive will "hang" household appliances (TVs with flash player, players, etc.). It is enough to do, as shown.
Alternative methods of formatting the flash drive (instead of 2.1)
2.1.1 Format the USB flash drive using HP USB Disk Storage Format Tool (is in the assembly on the way 2k10 \ Programs-2k10 \ Flash-Utilites \ HPUSBFW \ or in the menu under USB-Flash utility), you can use the quick format. Some PCs may not work (on a flash drive is connected properly boot). If it works, can be used for FAT32, and for NTFS.
2.1.2 Format the USB flash drive using BootICE (2k10 \ Programs-2k10 \ Flash-Utilites \ BootICE \) ... Recommended format so: BootICE (select flash) -> Parts Manage -> ReFormat USB disk -> USB-HDD mode (Single Partition) - Align to sectors: 2048 -> Next -> FAT32 (NTFS) -> OK. The same does not always work, I have - the loader is connected correctly only under NTFS.
2.1.3 Using FBInstTool (2k10 \ Programs-2k10 \ Flash-Utilites \ FBInstTool \). Utility for non-standard formatting flash drives, creates a framework of a special type (USB-ZIP or USB-HDD). Select USB flash drive (focus on size!), Noted in the formatting options:-raw-force, to format.
2.1.4 Use the script FlashFormat_2k10_FBinst (2k10 \ Programs-2k10 \ Flash-Utilites \ FlashFormat_2k10_FBinst \). Utility for non-standard formatting flash drives, creates a framework of a special type (USB-ZIP + USB-HDD). Select USB flash drive (focus on size!), Use the method of 7. RAW FORMAT, format.
The script automatically reconnects the USB flash drive so the "juggle" it after formatting is not necessary.
2.1.5 To format a USB drive with automatic connection boot XORBOOT recommended to use scripts:
a) FlashFormat_2k10_FBinst - Method 1 (up to 2GB flash drive under FAT16) or method 2 (4-32GB flash drive for FAT32). Support for USB-ZIP. On older systems will only boot WinXP-PE.
b) FlashFormat_2k10_FBinst - Procedure 5 (up to 2GB flash drives under FAT16) or Procedure 6 (4-32GB flash drive for FAT32). Support for USB-ZIP + USB-HDD. On older systems will only boot Win7-PE.
a) FlashFormat_2k10_RMprep - apply if the required support for NTFS, use Method 5 (the stick of any size.) Only support USB-HDD.
Scripts are automatically reconnect the USB flash drive so the "juggle" it after formatting is not necessary.
Scripts can be used both in the OS, and under assembly (any), they will automatically be connected XORBOOT in the MBR (sector 63, PBR is ignored). Immediately after formatting the USB flash drive can be checked for bootable (run XORBOOT) under any virtualke (eg, MobaLive).
2.2 After formatting, remove the USB flash drive and connect again.
2.3 You need to add files to a flash drive assembly - 2k10 folder and files bootmgr.efi and P2Start.exe. Bootmgr file on a flash drive / HDD is not used, so it is not copied. They can extract from an image using 7-zip, WinRar, Total Commander, FAR, UltraISO or copy any of the mounted virtualke for CD / DVD virtual disk to the root of the stick. If you format the flash produced scripts - boot media ready (loader XORBOOT connected).
Faster the first extract the contents of the image to a temporary folder on the screw, and then copy all of it on a flash drive - have been tested experience. You can also mount the image as a virtual CD-ROM and a copy of it - an effect of the same. If the establishment of the stick is made under the loaded assembly, convenient to mount the image using ImDisk (PCM on the image, "Mount ...").
The primary boot loader, if you wish, you can set / change at any time, as in a conventional operating system or under any PE-assembly (for connection downloaders meet MakeBoot_HHH.bat batch file in the folder 2k10, where XXX - loader).
2.4 The use of flash drives to boot Syslinux:
Need to make a bootable USB flash drive. Go to the folder 2k10 \ on the flash drive and run MakeBoot_SYSLINUX.bat. This batch file will